Guide

Set up WireGuard VPN

You use WireGuard VPN with the WireGuard app on your computer or phone. You download a configuration for the device and import it in the app.

About 3 minutes Updated 6 Nov 2026

Before you start

1
Log in to the client area, open Services and click Manage next to WireGuard VPN.
The VPN panel opens after a short load.
2
Open the Installation tab and download the WireGuard app for your computer or phone.

The file and the QR code contain your device’s key. Don’t share them with anyone.

3
Go back to Manage devices and click Download next to the location you want to connect through.
On your phone, choose Scan QR instead and scan the code with the WireGuard app.
4
Open WireGuard, choose Import and select the file you downloaded.
On a computer, it’s File › Import.
5
Turn on the connection in WireGuard.

Your traffic goes through Inleed’s VPN. You can check your IP address on a site that shows it.

My iPhone won’t turn on the connection

Why: The WireGuard app hasn’t been allowed to add a VPN profile, or your operator or employer is blocking VPN.

What to do: Allow the VPN profile on your iPhone and try again, preferably on another network.

The connection isn’t working

What to do: Go through the causes in the troubleshooting guide.

The service covers 5 devices. Each device gets its own configuration: pick the device under Manage devices or click Add new device.
You can connect through Stockholm, Tällberg, Los Angeles or London. Download all configurations (zip) gives you all locations at once.
A router must support WireGuard. Support doesn’t help with the settings in your own router.