Get started with the router from Inleed
The router we sell is a Comfast. The first time, you connect it and set your own wifi password.
Do you have a different router? Connect your router to the fibre box
Need to open a port, for example for a camera? Open a port in your router
How to get started
The first time
The router is new or has been reset.
- 1
Connect a network cable from the fibre box’s LAN port to the router’s WAN port, and plug in the power.
Don’t use the fibre box’s WAN port.
- 2
Connect to the wifi network
COMFAST_plus the last 4 characters of the MAC address on the label.There are often 2 networks, ending in
_2Gand_5G. - 3
Open this address, choose English and click Experience it now.
- 4
Choose Dynamic IP (DHCP) as the connection type and click Next.
Don’t choose PPPoE or Static IP.
- 5
Enter a wifi password in Password under 2.4G, leave the rest and click Done.
If Use 2.4G password as router management password is ticked, it also becomes the password for the settings page.
- 6
Wait while the router restarts, then connect to the wifi network with the password you chose.
Change the wifi name or password
The router is already set up.
- 1
Connect to the router’s wifi, open this address and log in with the settings page password.
You chose it the first time, often the same as the wifi password.
- 2
Open the wifi settings, change the name and password for both networks and save.
- 3
Connect your devices again with the new name or password.
How to know it worked
Done
You’re connected to the router’s wifi with your own password, and the internet works.
If something doesn’t work
I can’t find a network called COMFAST_
Why: Your neighbours’ networks show too, or the router already has another name.
What to do: Unplug the router and see which network disappears. That one is yours. You can also connect your computer by cable to a LAN port.
The page 192.168.0.1 won’t open
Why: The device isn’t connected to the router, or has a fixed IP address or a proxy set.
What to do: Connect directly to the router’s wifi or by cable. Let the computer get its IP address automatically and turn off any proxy.
I don’t know the password for the wifi or the settings page
Why: The password can’t be retrieved, by you or by us.
What to do: Hold down Reset with a paper clip for at least 7 seconds while the router has power. Wait 2 minutes and do the first-time steps again.
Wifi works but the internet doesn’t
What to do: Check that the cable runs from the fibre box’s LAN port to the router’s WAN port, and that Dynamic IP (DHCP) is chosen.
Internet isn’t workingGood to know
- The router’s MAC address is on the label. We may need it if you report a broadband fault. Find the MAC address
- Comfast’s own quick guides: CF-WR630AX and CF-WR630AX V2 .
Related guides
Need more help?
Email [email protected] or call 08-519 70 666.