Skip to content
Help Center Search the help center/
Guide

Protect your login against password guessing

Login protection blocks anyone who tries too many times in a short while. It’s on from the start for the WordPress login. You can change the limit and add your own, for example for a contact form.

About 2 minutes Applies to domain with CDN turned on Updated 20 Nov 2026

Before you start

  • The protection covers /wp-login.php and /xmlrpc.php: at most 5 attempts per 10 seconds, then blocked for 1 minute. With WordPress you usually don’t need to change anything.

How to change the protection

  1. 1

    Log in to the client area and click Manage next to the domain.

    The domain’s page opens.

Tip

Domain with another registrar? Click Manage next to it under the CDN & security tab on your hosting’s page.

  1. 2

    Open the CDN & security tab.

  2. 3

    Click Security.

    The Login protection card is below the firewall.

A

Change the WordPress limit

Block sooner or for longer.

  1. 4

    Choose 3, 5 or 10 attempts per 10 seconds under At most.

    The change is saved at once.

  2. 5

    Choose 30 seconds or 1 minute under Blocked for.

B

Add your own limit

For another address, for example a contact form that gets spam.

  1. 4

    Click Add your own limit.

    A form opens.

  2. 5

    Enter the address under Address, for example /contact.

    Everything that starts with the address counts.

    Every visit to the address counts, not only when the form is sent. Don’t set the limit too low.

  3. 6

    Choose the number of attempts per 10 seconds, 1–100, and how long the visitor is blocked.

  4. 7

    Click Save.

    The limit applies at once.

How to know it worked

Done

The limits are listed under Login protection and apply at once.

If something doesn’t work

You get blocked yourself when you log in

Why: Several attempts in a short while, for example from colleagues on the same network.

What to do: Wait a minute. Add your IP address as trusted, and you’re never blocked.

Block countries and IP addresses with web protection
Visitors get the error 429 on the form

Why: Your own limit is too low.

What to do: Raise the number, or click Remove.

The Add your own limit button is missing

Why: You already have your own limit. You can have one, besides the WordPress login.

What to do: Change the one you have, or remove it first.

Good to know

  • Anyone who is blocked gets the error 429 (Too Many Requests) until the block lifts.
  • Stopped attempts show under Logs with the type Login protection. See what web protection has stopped
  • The protection slows down guessing but doesn’t stop a leaked password. Use strong passwords and two-factor authentication in WordPress.
EmilLinusMelinda

Need more help?

Email [email protected] or call 08-519 70 666.